Menu
Your Cart

Atomic BC1 BCD with Inflator

Atomic BC1 BCD with Inflator
AED 5,429
Ex Tax: AED 5,170

The New Atomic BC1 is for the diver who wants the absolute best world-class BC on the market. Atomic begin with the intention of redefining the product category. Just as they did with regulators, fins and masks Atomic decided it was time to design the ultimate BC. The Atomic BC1 will debut as the definitive leader in the BC category. They started with the realization of the hard punishment the ocean inflicts on dive equipment. So, their priority for a BC was durability. The Atomic BC1 was created using exclusive engineering-grade plastics, polyurethane coated textiles, and corrosion-resistant metals. It is designed to go toe-to-toe with the ocean environment. It's the toughest BC in the world.

Atomics' custom matte-finish fabric has a different look & feel, making this new fabric unlike any other. Not only does it Look tough, it's built and designed to hold up year after year. Strong double-laminated polyurethane textile material is designed to hold more pressure. This material will handle cycle and burst pressures to failure nearly double that of standard BC materials. A watershed moment in BC design. Really The Atomic BC1 sheds water like a raincoat. Water does not penetrate the fabric with polyurethane coating on both sides. The exterior coating is thicker to prevent tearing, cutting or leaking. But, the big benefit the BC is virtually dry right after your dive. You will be amazed how easy this is to use, and how securely it holds your tank in place. The concept is like the bindings on ski boots. The ratcheting band quickly adjusts to accommodate a variety of tank sizes and the over-center buckle locks everything tightly in place. Gone are the days of trying to figure out how to weave nylon webbing into a buckle. Just push the molded belt teeth past the ratchet and lock it down with minimal effort.

It's quick and easy to load your weights in or out of the water. Two zippered weight pouches hold up to 10 lbs. (4.5 kg) each of hard or soft weights in sizes Small to Large and 14 lbs. (6.35 kg) each in X-Large. The weight pouches glide into the weight pockets under the arms and lock into place with a reassuring Snap." A simple one-handed tug on the handle is all that is needed to release. It's the same principle that has been used for years on Atomics EZ-LOK fin straps. BCD also has rear non-releasable weight pockets that can hold from 6 lbs. to 10 lbs. (2.7 kg to 4.5 kg) depending on the BCD size. The Atomic BC1 is designed to be exclusive even the manufacturing involves a custom hand-crafted sewing process and custom binding tape. An insert-molded polyester reinforced belt in the tank band ensures safety.

Other great features of the BCD are: Custom 316 stainless steel D-rings with titanium PVD coating for accessory attachment, diamond pattern quilted back pad & adjustable lumbar pad. There is a non-skid tank pad w/CNC machined stainless steel hardware molded to the frame & sand-resistant zippers on the two side pockets for additional storage of accessory items. The BCD provides the following lift capacities. SM provides 31 lbs. (14 kg), MD provides 32 lbs. (14.5 kg), ML provides 36 lbs. (16.33 kg), LG 39 lbs. (17.7 kg) and X-LG 48 lbs. (21.8 kg). Adjusting the BCD is achieved with torso, sternum & waist adjustable straps. All straps come equipped w/squeeze-style side release buckles for easy donning/doffing. The buckles are made from durable impact resistant plastic for strength & durability. Adjustable cummerbund for added comfort & security.

Buoyancy control is provided by Atomics Safe Second Inflator (SS1) Stainless Steel. When you learned to dive, you were taught specific skills to make you safe and comfortable underwater and at the surface. One of those skills was Buoyancy Control. Once you start diving for fun you use your BCD constantly thru-out the dive. Your octopus or alternate air source on the other hand is never used unless there is an emergency out of air situation. Reacting properly in an out of air emergency can make the difference between a safe dive and a tragedy. If your Octopus & BCD Inflator Device are combined you will always know where to find it in an emergency.

The SS1 takes the concept to new levels of convenience, reliability & performance. It contains a high flow 2'nd stage that performs like many high performance second stages. It will deliver air to a diver at depth with minimal effort. It is very stable and not prone to unnecessary free-flow or leakage from water movement while swimming, or during entries or exits. The inflator/deflator is easy to operate with soft-surfaced buttons placed where they can be easily operated with one hand.

The SS1 features a quick disconnect not only on the low-pressure hose, but the BCD hose as well. The adapters that fit the SS1 to the BCD are connected to the SS1 with a threaded collar that can be easily unscrewed to detach it completely from the BCD. Now you can carry or store the SS1 with your primary regulator and gauges (patent pending).

The SS1 combines the functions of the inflator and octopus regulator into a single unit. This reduces the overall bulk and weight of your dive gear; eliminates hoses, and places your back up regulator in a fixed, familiar location. This time proven concept is a convenient and efficient alternative to the dedicated octopus second stage. Reduce your rig by one hose with the high- performance Atomic SS1. Large oversized and ergonomically shaped buttons are easy to find for pneumatic or oral inflation and deflation. They are easy to distinguish and faced with soft tactile rubber surfaces.

The elliptically shaped body of the SS1 lies flat against the BCD keeping it out-of-the-way and reducing drag. Seat wear is the first cause of regulator leaks and performance degradation. The stainless steel dynamic orifice is pressure energized and only- contacts the rubber seat when in use. Equipped with a titanium lever this high strength metal part is the link to your air supply and will never fail due to rust or corrosion. The integrated purge cover is a one-piece flexible cover allows purge of the regulator when depressed anywhere on the cover surface.

The SS1 has 316 grade stainless steel inflation/deflation stem, demand valve body, stainless steel orifice springs and a quick disconnect. The mouthpiece and diaphragm are silicone rubber and the SS1 body is manufactured from fiberglass reinforced nylon. The SS1 is a dependable downstream demand valve design. The SS1 weighs 7 oz. (200 g) without the hose and the hose also weighs 7 oz. (200 g) and measures 28" (71 cm) in length. The BCD System comes with owner manuals.

Atomic Atomic BC1 Features

  • Atomic BC1 BCD with SS1 Stainless Inflator:
  • For Divers Wanting the Absolute Best World-Class BC
  • Atomic Product Mission: Redefining Product Category
  • Time to Design the Ultimate BC
  • Complete w/Breathable Inflator Regulator
  • Owner Manuals
  • Atomic BC1 BCD:
  • Atomics Priority for BC Durability:
    Engineering-Grade Plastics, Polyurethane Coated Textiles, & Corrosion-Resistant Metals
    Designed to Go Toe-to-Toe w/Ocean Environment
    Simply the Toughest BC In-the-World
  • Custom Matte-Finish Fabric, Different Look and Feel
  • New Fabric Unlike Any-Other-BCD
  • Bladder: Strong Double-Laminated Polyurethane Textile Material, Hold More Pressure
  • Sheds Water Like Raincoat, Polyurethane Coating on Both-Sides
  • Exterior Coating: Thicker, Prevent Tearing, Cutting or Leaking
  • Virtually Dry Right After Dive
  • Secure Tank Band Design:
    Ratcheting Band Quickly Adjusts
    Accommodate Variety of Tank Sizes
    Over-Center Buckle Locks Tightly-in-Place
  • Weight Integration:
    Dual Zipper Closure Weight Pockets
    Releasable Weight;
    Size SM to LG; Pouches Hold Up to 10 lbs. (4.5 kg)
    Size XL; Up to 14 lbs. (6.35 kg)
    Non-Releasable Weight; 6 lbs. to 10 lbs. (2.7 kg to 4.5 kg) Depending-On BCD Size
  • Weight Pouches Glide into Weight Pockets
  • Simple One-Handed Tug-On-Handle to Release Weight
  • Custom 316 Stainless Steel D-Rings with Titanium PVD Coating
  • Diamond Pattern Quilted Back Pad and Adjustable Lumbar Pad
  • Non-Skid Tank Pad with CNC-Machined Stainless Steel Hardware Molded to the Frame
  • Sand-Resistant Pocket Zippers
  • Custom Fit Adjustability:
    Torso, Sternum and Waist Adjustable Straps
    All Straps; Squeeze-Style" Side Release Buckles for Easy Donning/Doffing
    Buckles; Durable Impact Resistant Plastic for Strength and Durability
    Adjustable Cummerbund for Added Comfort and Security
  • 3-Planes of Adjustability: You're Assured Custom and Comfortable Fit
  • Lift Capacities:
    Small; 31 lbs. (14 kg)
    Medium; 32 lbs. (14.5 kg)
    Medium-Large; 36 lbs. (16.33 kg)
    Large; 39 lbs. (17.7 kg)
    X-Large; 48 lbs. (21.8 kg)
  • Atomic Safe Second Inflator (SS1), Stainless Steel:
  • Increased Safety in Out-of-Air Emergencies
  • Lightweight, Streamline, Eliminates Backup-Regulator (Octopus)
  • Easily-Operated with One-Hand
  • Convenience, Reliability and Performance
  • High Flow Second Stage
  • High Flow Rates to Diver at Depth with Minimum of Effort
  • Stable Not Prone to Free-Flow or Leakage from Water Movement
  • Soft-Surfaced Buttons
  • Adaptability to Almost Any BCD: Set-of-Adapters
  • Quick Disconnect BCD Hose: Easily Unscrewed-to-Detach it Completely from BCD
  • Carry or Store the SS1 with Primary Regulator and Gauges
  • Inflator and Octopus Regulator in a Single Unit
  • Reduces-the-Overall Bulk and Weight of your Dive Gear
  • Eliminates Octopus Hose: Reduce Rig by One-Hose
  • Convenient-and-Efficient Alternative to Dedicated-Octopus Second Stage
  • Large Oversized and Ergonomically-Shaped Buttons
  • Easy-to-Find for Pneumatic or Oral Inflation/Deflation
  • Elliptically-Shaped Body Lies-Flat Against BCD Keeping it Out-of-the-Way and Reducing Drag
  • Stainless Steel Dynamic Orifice is Pressure Energized
  • Titanium Lever: High-Strength Metal Will Never-Fail Due to Rust or Corrosion
  • Integrated Purge Cover is a One-Piece Flexible Cover, Depress Anywhere on Cover Surface
  • 316 Grade Stainless Steel
    Inflation/Deflation Stem
    Quick Disconnect
    Demand Valve Body
    Orifice and Springs
  • Silicone Rubber Mouthpiece and Diaphragm
  • Housing: Durable Fiberglass Reinforced Nylon
  • Dependable Downstream Demand Valve Design
  • Weight with Hose: 14 oz. (400 g)
  • Hose Length: 28" (71 cm) with Standard 3/8" Threads